The full potential of your onboard electronics – with the Vanemar NMEA 2000 Sensor
Your boat generates tons of data, which is usually only visible on the displays at the helm. With the Vanemar NMEA 2000 Sensor (Adapter), you can make this data mobile. This small device connects your existing NMEA 2000 network to the Vanemar Gateway and brings all important boat information directly to your pocket.
Keep an eye on engines & technology Have you ever wondered if everything is alright with the engine? Via the Vanemar app, you can now view critical engine data such as temperature, oil pressure, RPM, and exact engine hours. This not only helps with maintenance planning but also provides a sense of security.
Never again empty tanks No more guessing with fuel gauges. If your tank sensors (fuel, water, waste) are connected to the NMEA 2000 network, the Vanemar app will show you the fill levels with percentage accuracy. Plan your next refuel from home.
Real-time environmental data Check the conditions at the berth or at anchor. The sensor transmits data from your transducers for water depth, wind speed, wind direction, and water temperature.
Effortless installation Installation couldn't be easier: The sensor has a standardized Micro-C connector. It is simply plugged into a free T-connector of your NMEA 2000 backbone. The connection to the Vanemar Gateway is fully automatic and wireless – you don't have to run cables throughout the entire boat.
Supported data (depending on existing sensors in the network):
- Engine: RPM, temperature, oil pressure, operating hours, alternator voltage, coolant pressure, engine load.
- Tanks: Fill levels for up to 4 tanks (fuel, water, waste, oil, live well).
- Batteries: Voltage, current, temperature (if NMEA shunt is present).
- Navigation & Environment: Depth, Speed through water (STW), Speed over ground (SOG), Course (COG), Wind data (AWA/AWS/TWA/TWS), Rudder angle.
Technical Data
- Connection: NMEA 2000 Micro-C plug (Male)
- Communication: Wireless via ZigBee 3.0 (to the Vanemar Gateway)
- Power Supply: Directly via the NMEA 2000 bus
- Voltage: 9-32V DC (N2K Standard)
- Power Consumption: Very low (< 50mA, LEN: 1)
- Compatibility: Requires a Vanemar Gateway for operation.
Scope of delivery:
- 1x Vanemar NMEA 2000 Sensor
- Drop cable approx. 30cm
- T-piece
- Installation instructions
⚠️ Note: Please ensure that your boat has an NMEA 2000 network and that the desired data (e.g., from the engine) is already being fed into this network.